F. Passos, E. Roca, R. Castro-López, F. V. Fernández, Y. Ye, D. Spina, T. Dhaene, “Frequency-Dependent Parameterized Macromodeling of Integrated Inductors”, International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), Lisboa (Portugal), 27-30 Junio, 2016. ISBN: 978-1-5090-0489-8
Conferences
SIDe-O: A Toolbox for Surrogate Inductor Design and Optimization
F. Passos, E. Roca, R. Castro-López, F. V. Fernández, “SIDe-O: A Toolbox for Surrogate Inductor Design and Optimization”, International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), Lisboa (Portugal), 27-30 Junio, 2016. ISBN: 978-1-5090-0489-8
Aplicación de algoritmos evolutivos multiobjectivo al diseño de circuitos integrados: criterios de detención
E Roca, R Castro-Lopez and Francisco V. Fernández, “Aplicación de algoritmos evolutivos multiobjectivo al diseño de circuitos integrados: criterios de detención,” Congreso Español de Metaheurísticas, Algoritmos Evolutivos y Bioinspirados – MAEB, Merida – Almendralejo (España), 4-6 de Febrero de 2015. ISBN: 978-84-697-2150-6
High-Level Optimization of Sigma-Delta Modulators Using Multi-Objective Evolutionary Algorithms
Manuel Velasco-Jiménez, Rafael Castro-López and José M. de la Rosa, “High-Level Optimization of Sigma-Delta Modulators Using Multi-Objective Evolutionary Algorithms”, IEEE International Symposium on Circuits and Systems (ISCAS), Montreal, Canada, 23/05/16.
Design of a Power-Efficient Widely-Programmable Gm-LC Band-Pass Sigma-Delta Modulator for SDR
José M. de la Rosa, “Design of a Power-Efficient Widely-Programmable Gm-LC Band-Pass Sigma-Delta Modulator for SDR”, IEEE International Symposium on Circuits and Systems (ISCAS), Montreal, Canada, 23/05/16.
RF-to-Digital Sigma-Delta Converters – Design Trends, Challenges and Applications
José M. de la Rosa, “RF-to-Digital Sigma-Delta Converters – Design Trends, Challenges and Applications”, Conference on Design of Circuits and Integrated Systems (DCIS), Estoril, Portugal, 26/11/15.
A Comparison of CAD Tools for the Study of Nanoelectronic Devices, Circuits and Systems
José M. de la Rosa, “A Comparison of CAD Tools for the Study of Nanoelectronic Devices, Circuits and Systems”, Conference on Design of Circuits and Integrated Systems (DCIS), Estoril, Portugal, 26/11/15.
Introduction to the IEEE-CASS Workshop on Micro/Nanoelectronic Circuits and Systems
Teresa Serrano-Gotarredona and José M. de la Rosa: “Introduction to the IEEE-CASS Workshop on Micro/Nanoelectronic Circuits and Systems.” Proceedings of the IEEE EUROCON 2015, Salamanca, Spain.
A Comparative Study of nanoHUB Tools for the Simulation of Carbon-based FETs
J.M. de la Rosa: “A Comparative Study of nanoHUB Tools for the Simulation of Carbon-based FETs”. Proceeding of the nanoHUB User Conference, West Lafayette, Indiana, USA, August 2015. https://nanohub.org/resources/22739.
On the Use of Passive Circuits to Implement LC-based Band-Pass CT Sigma-Delta Modulators
G. Molina-Salgado, G. Jovanovic-Dolecek and J.M. de la Rosa: “On the Use of Passive Circuits to Implement LC-based Band-Pass CT Sigma-Delta Modulators”. Proceeding of the 2015 International Midwest Symposium on Circuits and Systems (MWSCAS), Fort Collins, Colorado, USA, August 2015.
DOI: 10.1109/MWSCAS.2015.7282024
Surrogate modeling and optimization of inductor performances using Kriging functions
F. Passos, R. González-Echevarría, E. Roca, R. Castro-López and F.V. Fernández, “Surrogate modeling and optimization of inductor performances using Kriging functions,” Int. Conf. on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Istanbul, Turkey, Sept. 2015.
Transformation conditions of performance fronts for operational amplifiers
E. Roca, R. Castro-López, M. Velasco and F.V. Fernández, “Transformation conditions of performance fronts for operational amplifiers,” Int. Conf. on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Istanbul, Turkey, Sept. 2015.
Integration of QMC Based Yield-Aware Pareto Front Techniques on MOEA/D for Robust Analog Synthesis
Murat Pak, F.V. Fernández and G. Dundar, “Integration of QMC Based Yield-Aware Pareto Front Techniques on MOEA/D for Robust Analog Synthesis,” Int. Conf. on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Istanbul, Turkey, Sept. 2015.
DOI: 10.1109/SMACD.2015.7301705
Physical vs. Surrogate Models of Passive RF Devices
F.Passos, M. Kotti, R. González-Echevarría, M.H. Fino, M. Fakhfakh, E. Roca, R.Castro-López and F.V. Fernández, “Physical vs. Surrogate Models of Passive RF Devices”. Proceeding of the 2015 International Symposium on Circuits and Systems (ISCAS), Lisbon, May 2015.
Design Space Exploration Using Hierarchical Composition of Performance Models
M. Velasco-Jiménez, R. Castro-López, E. Roca and F.V. Fernández “Design Space Exploration Using Hierarchical Composition of Performance Models”. Proceeding of the 2015 International Symposium on Circuits and Systems (ISCAS), Lisbon, May 2015.
Energy Efficient Transconductor for Widely Programmable Analog Circuits and Systems
A. Morgado, R. del Río and J.M. de la Rosa: “Energy Efficient Transconductor for Widely Programmable Analog Circuits and Systems.” Proceeding of the 2015 International Symposium on Circuits and Systems (ISCAS), Lisbon, May 2015.
Simulation-Based Comparison of CNT-Fets and G-Fets from a Circuit Designer Perspective
M. Porcel de Soto and J.M. de la Rosa: “Simulation-Based Comparison of CNT-Fets and G-Fets from a Circuit Designer Perspective.” Proceeding of the 2015 International Symposium on Circuits and Systems (ISCAS), pp. 105-108, Lisbon, May 2015.
DOI: 10.1109/ISCAS.2015.7168581
Overview of Carbon-Based Circuits and Systems
S. Rodríguez, A. Rusu and J.M. de la Rosa: “Overview of Carbon-Based Circuits and Systems.” Proceeding of the 2015 International Symposium on Circuits and Systems (ISCAS), Lisbon, May 2015.
Two-Stage Comb Decimator with Improved Frequency Characteristic
G. Molina-Salgado, G. Jovanovic-Dolecek and J. M. de la Rosa: “Two-Stage Comb Decimator with Improved Frequency Characteristic”. Proc. of 2015 Wireless Innovation Forum Conference on Wireless Communications Technologies and Software Defined Radio, San Diego, March, 2015.
Novel Two-State Comb Decimator with Improved Frequency Characteristic
G. Molina-Salgado, G. Jovanovic-Dolecek and J. M. de la Rosa: “Novel Two-State Comb Decimator with Improved Frequency Characteristic”. Proc. of 2015 IEEE Latin American Symposium on Circuits and Systems (LASCAS), Montevideo, February 2015.